When you change your vehicles ride height you can expect to change your vehicles suspension geometry at the same time. Camber is the most severe change which will affect tyre wear and the handling of you car. Eibachs Pro Alignment kits allow you to tune your cars handling and reduce uneven tyre wear.
It is now possible to correct rear camber on Chryslers new LX platform. This pair of offset bushings replace the stock bushings on the two rear upper control arms to offset camber by .75 or 1.5 degrees. By using the 66025 adapter along with the 40920 bushing press, these bushings can be installed without removing the control arms. These vehicles were produced with varying sizes of bushings - to find out which part number is the correct size for your application download this template: Chrysler Bushing Template
You will need to measure the outer bushing diameter on the most forward upper arm on the rear suspension.
Part numbers 66010 and 66020 are 41.5mm
Part numbers 66080 and 66085 are 39.5mm
Rear Adjustment range: 66010, 66080 Camber ±.75 degree 66020, 66085 Camber ±1.5 degree

This product allows adjustment by ±1.50°